[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Index by Month]

Re: bolbitis heudelotii (plant) problem

It was the mother plant for a bunch of them, It was doing fine for probably a year in my tanks, and the person I got the original cutting from had hers a year. That is what is so frustrating. Grew beautifully and madly for so long and then bam, it's rotting, and it's doing so in tanks at different temps with different light, CO2, and stocking levels that aren't even in the same room. Granted I let the CO2 and fertilizer slide lately due to migraines followed by surgery but still, it grew great before I started using CO2 and fertilizer. That additional salt theory sounds kind of plausible though, and maybe I medicated and forgot about it. I was using meds for hydra, now that I recall, that would be formaldehyde with copper, neither is good for plants is it? Stupid hydra. At least that's gone for now. Now have flubendazole for fighting hydra, anyone know if that is bad for plants?
Thanks,
Kate

throatwarbler mangrove wrote:

FWIW, I could never get this plant to establish in my
old fishroom. My water was very hard (so, anubias,
african cichlids and mexican livebearers loved it).
Was this an attempt to start the plant or was it
established? I think I have seen bolbitis grown out of
water and sold to the aquatic trade (much like those
little pine-tree plants). Plants started this way
generally have a hard time establishing themselves
when submerged.

Matt
--- "Hess, Clay A" <clay.a.hess@Boeing.com> wrote:


Hi Kate,

Have you treated your water for any type of diseases
of late?  I treated my tank for parasites awhile
back and had a similar issue with my java fern.  I
was using formaldahyde and found my plants did not
appreciate that at all. The leaves turned black
slowly and then broke loose of the main root and
floated away. Just a thought.  And, I do not think
that this is Off Topic for this list at all.  In
fact, I think this is a great item for the list.

Clay

-----Original Message-----
From: June Olberding [mailto:jdolb1@comcast.net]
Sent: Sunday, October 19, 2003 9:29 AM
To: gsas-member@thekrib.com
Subject: Re: bolbitis heudelotii (plant) problem


Hi Kate,
I haven't had much experience with bolbitis. I know
it doesn't seem to like
really high light environments.  I know you are not
running high light
tanks. You keep most of your water pretty soft. I
don't know if that may be
a problem. Mine is in a livebearer tank with KH of
4-5 and GH of 5-10. It
does well in that environment which has about 2
watts /gal of shop light. It
took a long time to establish and occasionally will
have a section go black
and fall away. Thought that to be normal or that I
had damaged leaf working
in tank. This may be inaccurate but I think it
doesn't like to be disturbed
or moved to new locations. AFA nutrients, I do run
my tanks rather rich.
Also you might try running a little DIY CO2 for it.
Generally folks don't
think of CO2 need in low light plant tanks, but has
been my experience that
adding CO2 did more than anything else, with the
exception of Flourite
substrate, to boost plant health in lower light
environment.
Re: OT. I would say definitely.
Regards
June



Hi,
I am having a problem with my bolbitis ferns-the


stems are turning black


and rotting, then leaving the ends with the leaves


free to disconnect


and drift away from the mother plant. Some leaves


also turn black.


Rhizomes are attached to wood, look fine. This is


happening in multiple


tanks. I have been pretty bad about fertilizing


and light bulbs may be


old but it seems odd that such a tolerant plant


would suffer the worst


for it while rotala indica which likes


light/fertilizer survives and


turns pink at the ends. Any bolbitis tips? Or do


the old leaves just do


this after a while? Seems like more than half of


the leaves on the


affected plants are going down, so it's probably


not only the oldest


leaves dying, though the new ones are ok... Other


tanks have younger


bolbitis cut from the same mother plant with the


same water parameters,


no problem with them.
Tips?
By the way, is this considered OT for this group?


Maybe replies should


be off list... :)
Kate

------------------
To unsubscribe from this list, please send mail to


majordomo@thekrib.com


with "Unsubscribe gsas-member" in the body of the


message. Archives of


this list can be found at


http://lists.thekrib.com/gsas-member/


------------------
To unsubscribe from this list, please send mail to
majordomo@thekrib.com
with "Unsubscribe gsas-member" in the body of the
message.  Archives of
this list can be found at
http://lists.thekrib.com/gsas-member/


------------------
To unsubscribe from this list, please send mail to
majordomo@thekrib.com
with "Unsubscribe gsas-member" in the body of the
message.  Archives of
this list can be found at
http://lists.thekrib.com/gsas-member/





__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
------------------
To unsubscribe from this list, please send mail to majordomo@thekrib.com
with "Unsubscribe gsas-member" in the body of the message.  Archives of
this list can be found at http://lists.thekrib.com/gsas-member/




------------------
To unsubscribe from this list, please send mail to majordomo@thekrib.com
with "Unsubscribe gsas-member" in the body of the message.  Archives of
this list can be found at http://lists.thekrib.com/gsas-member/


[The Krib] [AGA] [Aquaria FAQ] [GSAS]