Is there any particular reason you want/need to turn it off at night? - Erik On Mon, 19 Feb 2007, SUSAN WELENOFSKY wrote:
I only use about 1" of silicon tubing to connect to the check valve then another 1" or less to connect to the adapter for the narrow airline. June tied some wire around the one main needle valve barb. Maybe I should bring the regulator to the meeting Thursday to show you. Susan -----Original Message----- From: gsas-member-bounces@thekrib.com [mailto:gsas-member-bounces@thekrib.com] On Behalf Of Erik Olson Sent: Monday, February 19, 2007 7:54 AM To: Greater Seattle Aquarium Society member chat Subject: Re: [GSAS-Member] CO2 Systems Are you also using June's needle valves? The downside of those is that they use hose barb instead of a screw fitting, and cannot easily be built into a manifold. On the other hand, I have had no problem with them popping off. You should be able to drive multiple tanks with the regulator set at 10-15 PSI and the needle valves regulating flow. Maybe consider using vinyl airline tubing instead of silicone? You can also get little plastic clamp thingies for that size tubing, maybe at Lowem-Depot. You should also be able to add a solenoid downstream to any regulator without problem. I still never see the point of it though...never used one in 15 years now. - Erik On Mon, 19 Feb 2007, John wrote:Fittings, Inc will take the time to help you design exactly what you need. Graingers may have something on the shelf that would work. They are both just south of downtown. Probably closed today. On Feb 18, 2007, at 10:01 PM, Susan Welenofsky wrote: I have June O's CO2 regulator, and I think the brass things are needle valves. The trouble is when I have more that one connection, it's all screwy. I shut the valve off at night. When I turn it on, it is high pressure, sometimes blows the silicone hoses. Then I have to adjust the pressure valve. Then the pressure goes way down after awhile, and I have to readjust. Then adjust all the needle valves. Then move the hoses. Then the CO2 pours out or doesn't come out all. Then fiddle with the needle valves again. Then there was the time all the gas escaped into the apartment. This thing is driving me crazy. It seems like I can only run one tank successfully, when I'd like to do two or three, like June. However, I would like to turn it off at night, right? Does anyone here know of a good system or can direct me to someone or someplace that does? I see that it may cost $322 at Drs. Foster and Smith for a complete package that has an Azoo regulator. I've heard the JBL regulators on Ebay are no good and Milwaukee is, and of course ADA is the most expensive money can buy. Susan _______________________________________________ GSAS-Member mailing list GSAS-Member@thekrib.com http://lists.thekrib.com/mailman/listinfo/gsas-member Dr. John F. Ruhland The Natural Health Medical Clinic 4002 - 25th Avenue S, Seattle, WA 98108 206-723-4891 www.drruhland.com _______________________________________________ GSAS-Member mailing list GSAS-Member@thekrib.com http://lists.thekrib.com/mailman/listinfo/gsas-member
-- Erik Olson erik at thekrib dot com
_______________________________________________ GSAS-Member mailing list GSAS-Member@thekrib.com http://lists.thekrib.com/mailman/listinfo/gsas-member