[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Index by Month]

RE: [GSAS-Member] Safe in Tank Acrylic Sandpaper



Paul,

Were you using the sandpaper with the fish in the tank?  

Clay

-----Original Message-----
From: Paul Winchester [mailto:bravo454@hotmail.com] 
Sent: Monday, April 04, 2005 1:14 PM
To: gsas-member@thekrib.com
Subject: RE: [GSAS-Member] Safe in Tank Acrylic Sandpaper


I had no problems using the the sandpaper in the tank, didnt harm the
fish 
any I could see.

The 2000 grit would be about the finest I would use, beyond that its
similar 
to rubbing with a cloth and polish.  The finer papers also clog up
quickly 
and lose their "bite".

Paul

>From: "Susan Welenofsky" <welenofsky@comcast.net>
>Reply-To: Greater Seattle Aquarium Society member
>chat<gsas-member@thekrib.com>
>To: "'Greater Seattle Aquarium Society member chat'" 
><gsas-member@thekrib.com>
>Subject: RE: [GSAS-Member] Safe in Tank Acrylic Sandpaper
>Date: Mon, 4 Apr 2005 13:02:53 -0700
>
>I found McGuire's 2500 sandpaper ($20 per box, must buy whole package).

>I bought 2000 wet/dry grit today (5 sheets, $8). I'm going to use the 
>sander. They have finer grits at a different store, in Kirkland. So, I 
>can safely use the black wet/dry sandpaper while the fish are in the 
>tank? I would buy a package of that or 3,000 if someone wants to split 
>it with me. I can get an auto dealer/worker discount on the stuff.
>
>Susan
>
>-----Original Message-----
>From: gsas-member-bounces@thekrib.com 
>[mailto:gsas-member-bounces@thekrib.com] On Behalf Of Paul Winchester
>Sent: Monday, April 04, 2005 10:43 AM
>To: gsas-member@thekrib.com
>Subject: RE: [GSAS-Member] Safe in Tank Acrylic Sandpaper
>
>I have successfully used the black wet dry paper in a couple of my 
>acrylic tanks. I have heard that the micromesh works well but have not 
>found it locally in a fine grit.
>
>Depending on the depth of the scratch I would use 400-1800 grit, the 
>400
>for
>
>only the really deep scratches, then follow with 600-800 and then
>1200-1800.
>
>I sand in same the direction as the scratch. For teeth marks I would 
>sand
>in
>
>a circular motion and probably use 1200 first.
>
>You might want to start with the fine 1200-1800 first to see the 
>effect,
>but
>
>the finer paper requires more effort to see the results. Be sure to 
>always progress from the course paper to fine. Sand as little as 
>possible to prevent the area from looking distorted.
>
>After using the fine 1200-1800 grit paper the arcrylic can be polished 
>with a cloth and some of the arcylic polishing compound available at 
>the stores. I think similar results could achieved using other 
>polishing substances, like baking soda. If you didnt use too much it 
>shouldnt changes the ph much.
>
> >From: "Susan Welenofsky" <welenofsky@comcast.net>
> >Reply-To: Greater Seattle Aquarium Society member 
> >chat<gsas-member@thekrib.com>
> >To: "GSAS Member Chat" <gsas-member@thekrib.com>
> >Subject: [GSAS-Member] Safe in Tank Acrylic Sandpaper
> >Date: Mon, 4 Apr 2005 10:50:26 -0700
> >
> >What is a good, safe, in tank sandpaper? I believe I have a lot of 
> >scratches on the acrylic surface from tooth marks from a pleco. I 
> >read something about
> >micromesh being safe. I was also wondering if the black wet/dry auto
> >sandpaper was safe to use. I know they sell acrylic scratch kits that
are
> >safe to use in aquariums, with fish, but they are quite expensive.
> >
> >
> >
> >Susan
> >
> >_______________________________________________
> >GSAS-Member mailing list
> >GSAS-Member@thekrib.com 
> >http://lists.thekrib.com/mailman/listinfo/gsas-member
>
>
>_______________________________________________
>GSAS-Member mailing list
>GSAS-Member@thekrib.com 
>http://lists.thekrib.com/mailman/listinfo/gsas-member
>
>
>
>_______________________________________________
>GSAS-Member mailing list
>GSAS-Member@thekrib.com 
>http://lists.thekrib.com/mailman/listinfo/gsas-member


_______________________________________________
GSAS-Member mailing list
GSAS-Member@thekrib.com
http://lists.thekrib.com/mailman/listinfo/gsas-member

_______________________________________________
GSAS-Member mailing list
GSAS-Member@thekrib.com
http://lists.thekrib.com/mailman/listinfo/gsas-member